Cytracom ControlOne: Quick Start: Assigning a ControlOne Bridge

Topic

This article discusses how to assign a ControlOne Bridge as part of a ControlOne deployment..

Environment

• Cytracom ControlOne

Description

Quick start article index

1. Create the Gateway
2. Assign the Bridge
3. Set up your new Site
4. Connect your Site to the internet
5. Set up your LAN
6. Add users to ControlOne
7. Connect the ControlOne Bridge hardware

The ControlOne Bridge provides local segmentation and wide-area (SD-WAN) segmentation for your ControlOne Network. You need to assign a bridge before your resources can communicate.

Procedure

1. In the ControlOne Portal, select Bridge Inventory from the left-hand Navigation menu, then click the Show Bridge Inventory button at the top of the screen.  

Figure 1: Navigating to the Bridge Inventory (click to enlarge)

2. A list of available ControlOne Bridges will appear. Select the bridge you wish to use and click Assign. 

Figure 2: Assigning the ControlOne Bridge (click to enlarge)

3. The bridge will now appear in the Bridge Inventory section of the window, and you can proceed with your ControlOne setup. 

Figure 3: Assigned bridges in the Bridge Inventory (click to enlarge)

Next Step: Set up your new Site →

←Previous Step: Create the Gateway

Still have questions? Click here to learn how to contact Cytracom Technical Support or open a ticket.