Enabling Web Access

This applies to all TGP models:

Access to the Web interface is necessary to make any changes in the configuration of the phone. The setting that allows this is disabled when the phone is rebooted or sent from the factory. This setting is labeled as Embedded Web and in order to enable it:

  • Press the Menu button.
  • Scroll down to IP Service.
  • Choose Select.
  • Select Network Setting.
  • Scroll to Embedded Web.
  • Highlight Yes and Save.

The Local IP Address is needed at this point. Scroll up after saving the Embedded Web setting and select IP Settings. This will display the Local IP Address.

Keyword: enable, panasonic, TGP

Was this article helpful?
1 out of 1 found this helpful