Cytracom UCaaS: Setting up the Cytracom D2


This article discusses how to set up the D2


  • Cytracom UCaaS


Before you begin

It is very important to connect the LAN port first, then connect the power supply second. 


1. Plug the handset cable into the handset port

2. Plug the other end of the cord into the handset

3. Connect the LAN port

4. Power the phone by either using the power cord or the ethernet cord for POE (Power Over Ethernet)

Note: Power Specs: Universal power adapter included - Input:100-240V ; Output: +12VDC, 1A; Integrated Power-over-Ethernet(802.3af), Max power consumption 3.5W(power adapter) or 4W(PoE)

Still have questions? Click here to learn how to contact Cytracom Technical Support.

Was this article helpful?
4 out of 26 found this helpful