Auto Attendant Guide

Auto Attendants route calls based on the input of the caller. The caller will listen for options to dial a specific extension or group such as, press 1 for Support or 2 for Sales.

Note: Auto Attendants work well for businesses that have different departments.

Creating an Auto Attendant

  1. In the PBX, click on Auto Attendant on the menu bar.
  2. Click + New.
  3. Key in the Auto Attendant Name.
  4. Set the Attendant Timeout. This is the amount of time a caller has to key in their selection.
  5. Set the Digit Timeout. This is the amount of time a caller has between each key they press.
  6. Select the Timeout Route. The call will be routed to this destination if the caller does not make a selection within the time set via Attendant Timeout.
  7. Select the method for the Announcement. Expand an option below for instructions.
Record via Phone

Record the announcement directly from the phone using the code given when this option is selected.

  1. Select Record via Phone as the announcement method.
  2. Finish configuring the Auto Attendant and click Submit.
  3. Go back into the Auto Attendant to obtain the full dial string to record the greeting (*042xxxxxxx).
  4. Dial the string from a phone and follow the prompts to record your greeting.
Upload File

Upload a previously recorded audio file from your computer.

  • Supported formats: .wav or .mp3
  • Maximum file size: 10MB
Text to Speech (AI)

Type your greeting and the system will generate the audio using an AI voice. No recording or audio file is needed.

  1. Select Text to Speech as the announcement method.
  2. Click Preview to hear the sample voices available.
  3. Choose your preferred voice from the Voice dropdown menu.
  4. Enter your greeting message in the transcript box.
    Example: "Thank you for calling ABC Company. For sales, press 1. For support, press 2. To speak with an operator, press 0."
  5. Click Generate to create your audio announcement.
  6. Review the generated audio and select Use This Recording if you're satisfied.
  7. Click Submit to activate your new voice prompt.

Note: Text to Speech is an Early Access feature. If you do not see the Text to Speech option, a PBX admin must enable it first:

  1. From the main dashboard, click on the PBX section.
  2. Click the + button to expand the sub-menu options.
  3. Select Early Access.
  4. Click Join under the AI Text-to-Speech Greetings for Auto Attendants & Mailboxes section.

For more details, see Managing Early Access Features in Cytracom UCaaS Platform and AI Text-to-Speech Greetings for Auto Attendants & Mailboxes.

Default Recording

Use the system's built-in greeting, which states:

"Hello and thank you for calling. If you know your party's extension, you may dial it at any time. For a company directory, please press * now. To leave a message in our general company voice mailbox, continue to hold or press 1. To hear these options again, press 9 now. Thank you for calling."

Note: After uploading, recording, or generating your audio, please wait about 15 minutes for the system to update before calling in to test the new greeting.

  1. Configure the desired buttons and select a route to option. If a button is not needed, leave it blank.
  2. Click Submit to save the Auto Attendant.

Implementing the Auto Attendant into Call Routing (Example)

Creating a new Auto Attendant will not automatically start being used in your call routing. To do this, the Auto Attendant must be set as a route destination. This example shows how to route a phone number to an Auto Attendant directly.

  1. In the PBX, click Phone Numbers on the menu bar.
  2. Click on the number you need to set the Auto Attendant routing to.
  3. In the Number Routing section under Standard Routing, set the Default to Auto Attendant, and Route To - Destination to the name of the new Auto Attendant that was created.
  4. Click Submit.
Was this article helpful?
0 out of 0 found this helpful